Johor Bahru, Malaysia
Metal Door Frame Painting in Johor Bahru
Frame legs can chip along the threshold or rust where they meet a damp floor. Inspect the bottom edges and hinge mortices.
Measured contract rate for individual mild-steel sections up to 100 mm around. Includes primer, undercoat and two gloss coats. Measure each rail or frame member separately. Complex layouts and high access cost extra.
Budget estimate. Send photos and measurements for a written quote.
Condition and preparation
Identify steel, aluminium or galvanised parts and test sound existing paint. Mask runners, locks, hinges and other working surfaces as applicable.
Materials and application
Remove loose coating and treat exposed metal with a primer compatible with its type. Apply the agreed finish without bridging parts that move. Inspect the rebate, hinge plates and lower jamb corners before masking the adjoining walls.
What to put in the quotation
For the quotation, include frame depth, rust at the feet and wall or tile finishes touching it. Ask which metal preparation, protective coatings and access arrangements are covered.
Frequently asked questions
Can the frame be painted with the door in place?
Check opening angle and clearance to reach the rebate. Agree whether the hidden hinge edge is accessible and included.
How should I look after the finish?
Follow the product's return-to-use interval so contacting painted faces do not stick together. Watch corners and welds for early damage.
Related painting services
Locations for this work
All service areasWhat would you like painted?
Send the location, a wide photo, a close-up of the surface and your preferred date.